UniGas 3000 (1) - AOIP, Instrumentation de test et mesure, contrôle moteur
UniGas 3000 (2) - AOIP, Instrumentation de test et mesure, contrôle moteur
UniGas 3000 (3) - AOIP, Instrumentation de test et mesure, contrôle moteur

UniGas 3000

picto fleche Hand-held combustion gas analyzer with 4 sensors

Unigas 3000+ is an advanced flue gas analyzer for up to 4 gases: O2, CO, NO & NO2 or SO2 with electrochemical sensors, plus CO2 and NOx calculated.

Ask a question
Get a call

Unigas 3000+ is an advanced flue gas analyzer for up to 4 gases: O2, CO, NO & NO2 or SO2 with electrochemical sensors, plus CO2 and NOx calculated.

This gas analyzer provides data for up to 10 fuels for the calculating combustion values. It is equipped with audible alarms on gas measurements. 

Flue gas sampling probes with different lengths and shapes are available to meet all the requirements of the application. The sampling probe is connected to the instrument with a single or dual hose, a water trap and a suspended particle filter.

The instrument is delivered with a built-in rugged impact printer. The analyzer and its internal printer are powered by the same internal battery. Charger is supplied as standard.

A remote Pt100 probe (option 5 in table G) is available for remote combustion air temperature measurement. This probe is strongly recommended to obtain a high accurate measurement in forced air boilers.

Smoke index measurement is performed by using the optional external hand pump (ref: F7828000). The results can be stored in the internal memory and printed on the report.

A procedure can be selected to monitor the CO in ambient air using the internal sensors. An internal program allows CO max measurement in atmospheric boiler room test with 15 logged values.

Measured parameter Range Resolution UniGas 3000
O2 From 0 to 25% vol. 0.1% EC
CO From 0 to 8000 ppm 1 ppm EC
CO From 0 to 20000 ppm 1 ppm EC
CO2 From 0 to 99.9% 0.1% Calc
NO From 0 to 4000 ppm 1 ppm EC
NO LOW From 0 to 500 ppm 0.1 ppm EC
NOx From 0 to 4000 ppm 1 ppm Calc
NO2 From 0 to 1000 ppm 1 ppm EC
SO2 From 0 to 4000 ppm 1 ppm EC
Efficiency From 1 to 99.9% 0.1% Calc
Excess air From 1 to infinite 0.01% Calc
Delta P ±100 hPa 0.01 hPa
Tair/Tgas -10...100°C/ 0...1000°C 0.1°C Pt100 / Tc K
Calc

Further features

Zero calibration Automatic calibration procedure at instrument power-on. Fresh air inlet with electrovalve and separate pneumatic circuit
Self-diagnosis Sensor efficiency test with diagnostic page
Ambiant CO monitoring With an external probe
Gas level alarms Programmable from PC with GasConfig software
Sampling pump 1.4 l/min - 100 mbar
Smoke measurement Using the external manual pump
Printer 24 columns with 58 mm paper roll
Autonomy:, 40 reports with full battery

General specifications

Size 115 x 90 x 330 mm
Weight 1.1 kg with battery and printer
Power supply 110/230 VAC (50/60 Hz)
Battery Type: Rechargeable 7.2 Ah
Battery life: 10 hours continuous use
Charging time: 3 h at 90%
Communication ports USB
Internal test memory Up to 250 complete analysis data points structured by boiler

Environmental specifications

Operating reference range From -5°C to +45°C (up to 50°C for short time)
Storage temperature limits From -20 to +60°C (3 months max. at temperatures exceeding the operational limits)

Instrument:

Ordering code structure: 7825 – A – B – CC – D – EEE – F – GGGGG – H / X

Please select the required options from tables A, B… below to define the right device reference.

7825                 UniGas 3000

Standard delivery includes:

  • Base unit with 2 sensors (O2 + CO)
  • Li-ION battery + charger module
  • Internal impact printer
  • Draft and differential pressure measurement
  • CO cell dilution system
  • Configuration software GasConfig
  • Data management software DBGas2004 Lite version
  • USB adapter
  • Factory test report
  • Instruction manual
  • Warranty: 1 year

Table A – Sensor n°1

1                      O2 (0 - 25%)

Table B – Sensor n°2

2H                    CO (0 - 8,000 ppm) H2 compensated + Dilution system

2X                     CO (0 - 20,000 ppm)

Table C – Sensor n°3 and n°4 (2 choices mandatory)

0                      None

4                      NO (0 - 4,000 ppm / res. 1 ppm) & NOx calculation (sensor n°3 only)

4LO                  NO (0 - 500 ppm / res. 0.1 ppm) & NOx calculation (sensor n°3 only)

5                      NO2 (0-1000 ppm) (sensor n°4 only)

6                      SO2 (0-4000 ppm) (sensor n°4 only)

Table D – Sample probes - including water trap and line filter (1 choice only)

0                      None

1D                    180 mm sampling dual hose probe BB610051 (Gas + Draft) - max 800°C

3                      300 mm sampling dual hose probe BB610046 (Gas + Draft) - max 800°C

5D                    750 mm sampling dual hose probe BB610080 (Gas + Draft) - max 800°C 

Table E – Options (1 is mandatory)

1                      Built-in impact printer

3                      Leak test kit (pump + hose + adapters)

6                      Electrovalve for autozero quick start-up

8                      Internal sensor for gas leak detector (sniffer)

Table F – Mains adapter / Charger (1 choice only)

1                      115 V – 50 / 60 Hz – USA plug

3                      230 V – 50 / 60 Hz – UK plug

4                      230 V – 50 / 60 Hz – European plug

5                      100 V – 50 / 60 Hz – USA / Japan plug

Table G – Accessories

0                      None

1                      DBGas 2004 standard software

3                      ABS rigid carrying case

3V                    Vinyl carrying case with shoulder strap

5                      Pt100 remote air temperature sensor with 2 m cable and positioning cone

7                      Differential pressure connection kit (2 x EE300088)

B                      Manual pump for smoke index measurements + 40 filters + table

Table H – Calibration certificate

1                      Factory certificate (gas + pressure + temperature)

Table X – Customization

INTL                 English language - manual in English - English Keyboard

USA                  English language - manual in English - English Keyboard

FR                    French language - manual in French - French Keyboard

HOL                  Dutch language - manual in English - English Keyboard

POL                  Polish language - manual in English - English Keyboard

SPA                  Spanish language - manual in English - English Keyboard

UK                    English language - manual in English - English Keyboard

Accessories:

Probes and sensors:

BB610051          180 mm sampling dual hose probe BB610051 (Gas + Draft) - max 800°C

BB610046          300 mm sampling dual hose probe BB610046 (Gas + Draft) - max 800°C

BB610080          750 mm sampling dual hose probe BB610080 (Gas + Draft) - max 800°C

BB830018          Pt100 remote air temperature sensor, with 2 m cable and positioning cone

BB830025          External probe for natural boiler draft (200 Pa)

F2132100          130 mm air TC K-type probe

F2137100          130 mm contact TC K-type probe

F2139000          Pipe Velcro TC K-type probe

F2139100          Tc K-type clamp temperature probe

F2139200          Pt100 clamp temperature probe

BB610057          3 m extension for dual hose probe and Tc

BB610103          6 m extension for dual hose probe and Tc

Test tools and miscellaneous:

EE300088          Single hose pressure probe and burner hose kit

EE300248          Kit for detecting leaks in gas networks (pump + hose + adapters)

F7828000          Manual pump for smoke index measurements + 40 filters + table

Software and connectors:

BB260166          DBGas 2004 standard software

EE700476          USB adaptator cable

Transport cases and protections:

BB880028          ABS rigid carrying case

BB880043          Vinyl carrying case with shoulder strap

EE880047          Rubber holster with magnetic support

Consumable parts:

EE340005          Printer paper roll - Minimum order of 10 pcs

EE490002          Printer ribbon - Minimum order of 3 pcs

EE650011          Filter for soot (40 pieces per pack)

EE650074          Filter cartridge for EE650076 / EE 650082 water trap + filter - Minimum order of 10 pcs

Product Description Release Type
DBGas 2004

Data management software under Windows©

4.0.18 zip
DBGas 2004

Instruction manual

MM850523-K12
GasConfig

Configuration software under Windows©

2.0.22 zip
GreenLine 4000 / UniGas 3000

Instruction manual

MM850402-K12 pdf