LGS39-001 (1) - AOIP, Instrumentation de test et mesure, contrôle moteur
LGS39-001 (2) - AOIP, Instrumentation de test et mesure, contrôle moteur

LGS39-001

picto fleche Pulse Recorder

Measurement range: up to 10 Hz
Signal: pulse input


Certification: CE

Ask a question
Get a call

The LGS39 is an impulse recorder that can be used in two different modes:

Monitoring (real-time monitoring applications): the recorder sends its measurements to the PC in real time. If a measurement is not received by the PC, it stores it in its internal memory and sends it to the PC on the following communication channel

Recording/Restitution (follow-up): the recorder records the measurements it takes in its on-board memory. The user can download all the stored measurements to the PC at any time.

It is equipped with :

IP65 enclosure (Aluminium)
½ wave antenna
Power supply AA battery (Lithium Thionyl)

LGS39
Interface impulse
Number of inputs 1
Measurement range Up to 10 Hz
Accuracy (without sensor) Not applicable
Resolution Not applicable
Power supply for the sensor Not applicable
Minimum pulse duration 20 ms
Communication Type Dry contact or CMOS 0 – 3.5V
Temperature sensor YES

 

Temperature range of use of the Logger -40°C… +85°C
IP level of data logger and the connector IP65

The tightness level of the product is only valid if the probe and antenna are correctly tightned (seals crushed)

 

Battery AA Lithium Thionyl battery (included) with plug-in connector
Autonomy Up to 3 years

At 25°C with a measurement frequency of 10 minutes. Average value may vary slightly depending on use, given with the product working in non-alert mode.

 

RF antenna connector SMA connector
Antenna ½ wave antenna (included)
RF range in free land 100m to 1km (depending on the antenna used on the reception side)
Memory capacity 32 256 measurements with date and time
Time and date resolution 1s
Time deviation +/- 2min/month at 25°C
Data memory retention 100 years
ILS Integrated ILS for various functions :

-          Product wake-up when placed in hibernate mode (depp slepp)

-          Forced measurement outside the set measurement frequency

 

Features Aluminium casing (4mm)
Fixation Fixation support provided screwed in the casing for screwing in 4 points or strapping through 2 holes
Colour Grey (aluminium)
Dimensions (w/o antenna) Length : 98 mm

Depth : 64 mm

Heigth : 34 mm
Weight About 280 g
Stickers 2 stickers on the product :

-          1 sticker on the top face, giving the product range

-          1 sticker on the side, giving the complete product reference and its serial number