LGR64-001
Temperature Sensor
Measurement range (Temperature) : -40°C … +85°C
Accuracy (Temperature): ±0.2°C
Range (Humidity): 0…100% (Humidity)
Accuracy (Humidity): ±1.8
Certification : CE
Measurement range (Temperature) : -40°C … +85°C
Accuracy (Temperature): ±0.2°C
Range (Humidity): 0…100% (Humidity)
Accuracy (Humidity): ±1.8
Certification : CE
The LGR-64 is a temperature and humidity sensor with two operating modes:
Monitoring (real-time monitoring applications): the logger sends its measurements to the PC in real time. If a measurement is not received by the PC, it stores it in its internal memory and sends it to the PC on the next communication channel.
Recording / Playback (post-monitoring): the recorder records the measurements it takes in its internal memory. The user can download all the stored measurements to the PC at any time.
It is also equipped with :
IP65 enclosure (Aluminium)
½ wave antenna
Power supply AA battery (Lithium Thionyl)
LGR64 | |
Temperature measurement range | -40°C… +85°C |
Relative humidity
Measurement range |
0… 100%RH
The maximum dew point is brought down to 80°C Dew formation resistant |
Accuracy | See below |
Resolution | Humidity : 0.03%RH
Temp. : 0.015°C |
Response time | < 10s
For temperature and humidity |
Long term drift | Humidity : <0.5%RH / year
Temp. : <0.05k / year |
IP | IP65, sensor excepted
The level of tightness of the product is valid only if the probe and antenna are properly tightened (seals crushed) |
Battery | AA Lithium Thionyl (included) with plug-in connector |
Autonomy at 25°C | Up to 3 years
At 25°C with a frequency measures of 10 minutes. Average value which can slightly vary depending on the use. It is given with the product working in non alort mode. |
Antenna RF connector | SMA connector |
Antenna | ½ Wave antenna (included) |
RF range in free land | 100m to 1km, depending on the antenna used on the reception side |
Memory Capacity | 32 256 measurements with date and time |
Time resolution | 1s |
Time deviation | +/- 2min/month at 25°C |
Data memory retention | 100 years |
ILS | ILS integrated for several functions :
- Wakeup of the product in hibernate mode - Take of a measure outside of the frequency measure set |
AOIP offers a complete range of services: technical assistance and advice, calibration and verification by the SOFIA laboratory, equipment repair, maintenance, assistance and metrological monitoring, equipment rental, training, installation and commissioning of your equipment. More informations