ICO 51 is a programmable digital panel meter 72 x 24 mm for electrical measurements in 10,000 points. It allows DC and AC voltage to be measured up to 400 V (true effective value with or without component continuous health) and DC and AC current to be measured up to 5 A using a small shunt screwed on the back connector.
Panel meter size: 72 mm x 24 mm
Measurement, display and scaling of:
DC and AC voltage up to 400 V
DC current up to 2,000 A with an external shunt
AC current up to 200 A + Current transformer, with secondary current of 1 A or 5 A
Continuous mode: -40 to 100 % range. Alternate mode: 4 to 100 % range from 25 to 500 Hz without D.C component (possible measurements up to 10 kHz on some ranges with less precision).
(1) Extended measurement range: -40 to +110% range. (2) With external shunts Common rejection mode: ³ 110 dB at 50 Hz on 500 mV DC range Acceptable maximum voltage on voltage range: 600 V. Acceptable maximum voltage: 250 V~ in common mode.
Short-circuit on the rear panel
The value is to be entered using keyboard, while the value of measurement corresponding can be is introduced of the same way, is measured by the instrument. This possibility is very interesting for error corrections on temperature ranges.
2.5 samples / s
99 x 36 x 120 mm
From -1999 to 9999 with 14 mm red, yellow or green indication LED
230 V at ±10% (50/60 Hz) Other power supplies available in option
23°C ±1°C (20 to 75 % w/o condensing)
Operating reference range
0 to 50°C (RH: 20 to 75 % w/o condensing)
Limit operating range
-10°C to +50°C (RH: 10 to 80 % w/o condensing)
Indice de protection
IP40 in ABS case IP65 in watertight metallic case
Ordering reference code: ICO51-Isolated power supply-Display-Enclosure
AOIP offers a complete range of services: technical assistance and advice, calibration and verification by the SOFIA laboratory, equipment repair, maintenance, assistance and metrological monitoring, equipment rental, training, installation and commissioning of your equipment. More informations