ICO 52 (1) - AOIP, Instrumentation de test et mesure, contrôle moteur
ICO 52 (2) - AOIP, Instrumentation de test et mesure, contrôle moteur

ICO 52

picto fleche Programmable digital multifuncton panel meter for electrical and temperature measurements

ICO 52 are 10,000 point programmable digital multifunction panel meters 72 x 24 mm for temperature, process voltage and process current measurements.

Ask a question
Get a call

ICO 52 are 10,000 point programmable digital panel meters 72 x 24 mm for temperature, process voltage and process current measurements. They can be used together with temperature sensors, either resistive probes Pt or thermocouples. It is possible to change the configuration of measurement type, range, limits and scaling.

The configuration of these parameters is protected against any inopportune modifications. 

  • Panel meter size: 72 mm x 24 mm
  • IP65 protected
  • Measurement, display and scaling of:
    • Temperature with Pt100, Pt1000 probes or thermocouples (7 types)
    • Process voltage and current (0-10 V, 4-20 mA)
    • Resistance
  • 9 different power supplies available

Process electrical measurement indicator

Type Range (1) Resolution Accuracy (1 year)
(23°C ±1°C)		 Comments
DC voltage 50 mV
500 mV
5 V
50 V		 10 µV
100 μV
1 mV
10 mV		 0.1% + 10 μV
0.1% + 100 μV
0.1% + 1 mV
0.1% + 10 mV		 Input impedance
> 1000 MΩ
> 1000 MΩ
1 MΩ
1 MΩ
DC current 4-20 mA or 0-50 mA 10 µA 0.2% + 10 µA 10 Ω shunt
AC current 1 A (2)
5 A (2)		 1 mA
1 mA		   Measuring current 200 µA

Temperature coefficient: ≤ 10% accuracy/°C
Automatic ranging

(1) Extended measurement range: -40 to +110% range. 

Temperature indicator

Type Range (1) Resolution Accuracy over 1 year
(23°C ±1°C) (2)
Pt100 -200 to +500°C
-220 to +1200°C		 0.1°C
1°C		 0.1% RDG + 0.2°C
0.1% RDG + 2°C
Pt1000 -200 to +500°C 0.1°C 0.1% RDG + 0.2°C
Tc K -100 to +1000°C
+1000 to 1372°C		 0.1°C
1°C		 0.1% RDG + 0.4°C
0.1% RDG + 1°C
Tc T -100 to +400°C 0.1°C 0.1% RDG + 0.4°C
Tc Platine -100 to +1400°C 0.1°C 0.1% RDG + 0.4°C
Tc J -120 to +999°C 0.1°C 0.1% RDG + 0.4°C
Tc L -40 to +900°C 0.1°C 0.1% RDG + 0.4°C
Tc R -50 to +120°C
+120 to 1768°C		 1°C
1°C		 0.1% RDG + 2°C
0.1% RDG + 1°C
Tc S -50 to +450°C
+450 to 1768°C		 1°C
1°C		 0.1% RDG + 2°C
0.1% RDG + 1°C

Temperature coefficient: ≤ 10% accuracy/°C
Display in °C or °F.

(1) For a defined type of sensor, the commutation of range and the change of resolution can be automatic.
Measurement range extendable.
(2) Accuracy given without reference junction.
The typical error brought by the reference junction (AN8002) is 0.3°C.

Further features

Measurement hold Short-circuit on the rear panel
Scaling The value is to be entered using keyboard, while the value of measurement corresponding can be is introduced of the same way, is measured by the instrument.
This possibility is very interesting for error corrections on temperature ranges.
Sampling rate 2.5 samples / s

General specifications

Size 99 x 36 x 120 mm
Weight 300 g
Display From -1999 to 9999 with 14 mm red, yellow or green indication LED 
Supply 230 V at ±10% (50/60 Hz)
Other power supplies available in option

Environmental specifications

Reference range 23°C ±1°C (20 to 75 % w/o condensing)
Operating reference range 0 to 50°C (RH: 20 to 75 % w/o condensing)
Limit operating range -10°C to +50°C (RH: 10 to 80 % w/o condensing)
Indice de protection IP40 in ABS case
IP65 in watertight metallic case

 

Instrument:

Ordering reference code: ICO52-Isolated power supply-Display-Enclosure

Isolated power supply:

48 V~                    9

230 V~                   8

115 V~                   7

24 V~                    6

36 to 72 V-             5

18 to 36 V-             4

9 to 18 V-               3

5 V-                       2

 

Display:

Red                       R

Green                    V

 

Enclosure:

Plastic                   P

Metal                     M 

Accessories:

AN8002                 Cold Junction Compensation Module

AN8003                 Shunt 1 A - 100 mV

AN8004                 Shunt 5 A - 100 mV

AN8005                 Shunt 4-20 mA (50 ohms)

AN5844                 Current transformer 2/1 A

AN5845                 Current transformer 20/1 A

AN5846                 Current transformer 200/1 A

ER42062-001          RC protection circuit

AMD002-000: Current transformer 20/5A

AMD003-000: Current transformer 200/5 A

Product Description Release Type
VISULOG

Instruction manual

 pdf
VISULOG WEB

For remote access to VISULOG software

 1.5B exe