ICO 62

picto fleche Programmable digital panel meter for temperature and process signals

ICO 62 is a 10,000-point programmable digital panel meter 96 x 24 mm for temperature, process voltage and process current measurements.

Ask a question
Get a call

ICO 62 is a 10,000 programmable digital panel meter 96 x 24 mm for temperature, process voltage and process current measurements. It can be used together with temperature sensors, either resistive probes Pt or thermocouples. It is possible to change the configuration of measurement type, range, limits and scaling.

The configuration of these parameters is protected against any inopportune modifications.

  • Panel meter size: 96 mm x 24 mm
  • IP40 protected
  • Measurement, display and scaling of:
    • Temperature with Pt100, Pt1000 probes or thermocouples (7 types)
    • Process voltage and current (0-10 V, 4-20 mA)
    • Resistance
  • 9 different power supplies available

Electrical measurement indicator

TypeRange (1)ResolutionAccuracy (1 year)
(23°C ±1°C)
Comments
DC voltage>50 mV
500 mV
5 V
50 V
>10 µV
100 μV
1 mV
10 mV
>0.1% + 10 μV
0.1% + 100 μV
0.1% + 1 mV
0.1% + 10 mV
Input impedance
> 1000 MΩ
> 1000 MΩ
1 MΩ
1 MΩ
DC current4-20 mA or 0-50 mA10 µA0.2% + 10 µA10 Ω shunt
AC current1 A (2)
5 A (2)
1 mA
1 mA
 Measuring current 200 µA

Temperature coefficient: ≤ 10% accuracy/°C
Automatic ranging

(1) Extended measurement range: -40 to +110% range.

Temperature indicator

TypeRange (1)ResolutionAccuracy over 1 year
(23°C ±1°C) (2)
Pt100-200 to +500°C
-220 to +1200°C
0.1°C
1°C
0.1% RDG + 0.2°C
0.1% RDG + 2°C
Pt1000-200 to +500°C0.1°C0.1% RDG + 0.2°C
Tc K-100 to +1000°C
+1000 to 1372°C
0.1°C
1°C
0.1% RDG + 0.4°C
0.1% RDG + 1°C
Tc T-100 to +400°C0.1°C0.1% RDG + 0.4°C
Tc Platine-100 to +1400°C0.1°C0.1% RDG + 0.4°C
Tc J-120 to +999°C0.1°C0.1% RDG + 0.4°C
Tc L-40 to +900°C0.1°C0.1% RDG + 0.4°C
Tc R-50 to +120°C
+120 to 1768°C
1°C
1°C
0.1% RDG + 2°C
0.1% RDG + 1°C
Tc S-50 to +450°C
+450 to 1768°C
1°C
1°C
0.1% RDG + 2°C
0.1% RDG + 1°C

Temperature coefficient: ≤ 10% accuracy/°C
Display in °C or °F.

(1) For a defined type of sensor, the commutation of range and the change of resolution can be automatic.
Measurement range extendable.
(2) Accuracy given without reference junction.
The typical error brought by the reference junction (AN8002) is 0.3°C. 

Further features

Measurement holdShort-circuit on the rear panel
StatisticsMemorizing of maximum and minimum values
ScalingThe value is to be entered using keyboard, while the value of measurement corresponding can be is introduced of the same way, is measured by the instrument.
This possibility is very interesting for error corrections on temperature ranges.
Sampling rate2.5 samples / s

General specifications

Size99 x 36 x 120 mm
Weight300 g
DisplayFrom -1999 to 9999 with 14 mm red, yellow or green indication LED
Supply230 V at ±10% (50/60 Hz)
Other power supplies available in option

Environmental specifications

Reference range23°C ±1°C (20 to 75 % w/o condensing)
Operating reference range0 to 50°C (RH: 20 to 75 % w/o condensing)
Limit operating range-10°C to +50°C (RH: 10 to 80 % w/o condensing)
Indice de protectionIP40 in ABS case
IP65 in watertight metallic case

Safety

Protections- Protection of unit programming by access code.
- Protection of the threshold values by safety function programming

 

Instrument:

Ordering reference code: ICO52-Power supply-Display-Enclosure

 

Power supply:

48 V~                    9

230 V~                   8

115 V~                   7

24 V~                    6

36 to 72 V-             5

18 to 36 V-             4

9 to 18 V-               3

5 V-                       2

 

Display:

Red                       R

Green                    V

Accessories:

AN8002                 Cold Junction Compensation Module

AN8003                 Shunt 1 A - 100 mV

AN8004                 Shunt 5 A - 100 mV

AN8005                 Shunt 4-20 mA (50 ohms)

AN5844                 Current transformer 2/1 A

AN5845                 Current transformer 20/1 A

AN5846                 Current transformer 200/1 A

ER42062-001          RC protection circuit

ProductDescriptionReleaseType
ICO 62 / 122

Instruction manual

NT46034-100DPDF
VISULOG

Instruction manual

pdf
VISULOG WEB

For remote access to VISULOG software

1.5Bexe